Features and Benefits:
- Mitey Bee Gun - RUSFRE 1020F-1 comes in one gallon plastic disposable containers which can be used as received. Unscrew and remove cap "A". Insert dip tube "B into the container and screw on Cap "C" which is attached to the material hose "D" of the 5050 gun.Attach air line "E". Raise airline pressure to 40-60 p.s.i. and the gun is ready to use.
- How to apply: Hold the gun approximately 10 inches from the surface to be coated. Squeeze the trigger and hold for a few seconds for the material to appear. Spray in even strokes until you get the coating desired. By adjusting tube "F": ie., screwing it in or out, a fine or course spray can be obtained. The spray can also be affected by the amount of air pressure used: the lower the pressure the coarser the spray.CAUTION: Do not use too much pressure in clearing the gun or it will damage the container and its lid.Keep your gun and tip clean by flushing it after use with 1050Q or 1050-1 Cleaner & Reducer or paint thinner. DO NOT USE LACQUER THINNER
